Lift rubber 1101
丙烯酸酯型双组份粘接胶，属最新高科技产品，具有耐水性好、强度高、气味小、使用方便、贮存稳定等特点。用于粘接电梯桥厢的加强筋板。固化速度快、胶层结构牢固不易断裂，耐老化、耐油污，粘接物经久耐用。
Acrylate type two-component adhesive, is the latest high-tech products, with good water resistance, high strength, low odor, convenient use, storage stability and so. Reinforcing plate for bonding the elevator car bridge. Fast curing, layer structure is firm and not easy to fracture, aging resistance, oil resistance, adhesive durable.
一、 产品主要特征及性能
A, product characteristics and performance
|
产品
类别
|
特征
|
粘度（Pa.S）
|
工作温度（℃）
|
拉伸剪切强度（MPa）
|
拉伸强度（MPa）
|
25℃初固时间（min）
|
|
A组分
|
粉红色粘稠液体，无明显机械杂质
|
8~10
|
-60~+120
|
≥20
|
≥16
|
5~8
|
|
B组分
|
浅绿色粘稠液体，无明显机械杂质
|
5~8
|
Two, use points
◆粘接表面勿需严格除油处理，只需一般清洁，保持干燥即可。
The bonding surface without strict degreasing treatment, only the general cleaning, keep dry.
◆按1：1（体积或重量）比例调匀，涂于需粘接表面，室温压合15分钟即可固化粘牢，进行下一道工序。
◆ press 1:1 (volume or weight ratio and mix thoroughly, apply) to the bonding surface, room temperature curing adhesive pressing for 15 minutes, the next step.
◆操作环境保持通风良好，稍有异味，切勿入口。
Maintain good ventilation the operating environment, a little peculiar smell, no entrance.
三、 储运
Three, storage and transportation
◆产品在运输和装卸过程中避免倒放、碰撞和重压，防止日晒、雨淋和高温。
The product avoids upside down, collision and stress during shipping and handling, to prevent the sun, rain and high temperature.
◆产品在25度以下储存，储存期为6个月。防止日光直接照射，远离火源。
The product is stored in 25 degrees below, storage period of 6 months. To prevent direct sunlight, away from fire.
◆切勿让儿童接触。
◆ keep out of reach of children.
四、 包装
Four, packaging
◆塑料瓶包装， 2KG/瓶（2瓶/组）
◆ plastic bottles, 2KG/ bottles (2 bottles / group)
本公司保证上述资料的真实性，但用户选择时该资料仅作参考，请用户先试用后再使用。
The company to ensure the authenticity of the above-mentioned information, but users choose the data for reference only, please try again after use.