FS-1255 filter for anaerobic adhesive
FS-255 filter for anaerobic adhesive factory selection of raw materials for the production of high performance acrylic adhesive for bonding between metalmaterials. The adhesive component, moderate viscosity, high strength, fast curing; seal for automobile filter cover.
One, main performance and index
| 1、appearance： | purple liquid |
| 2、viscosity（23℃）： | 4000～7000 |
| 3、curing time（23℃）： | initial curing:5mins，full curing:24hrs |
| 4、max filling gaps： | 0.2mm |
| 5、destroy torque： | ≥15N·m |
| 6、shear strength： | ≥35MPa |
| 7、shelf life： | 1 year(25℃below) |
Two, the use of methods
1, to be bonded parts with acetone scrub, completely remove the oil andrust stains.
2, after solvent volatilization, uniform coating, coating weight should ensure that coated with adhesive surface, no leakage.
3, after the glue, standing for a few minutes, the preliminary position can be moved.
In three, the matters needing attention
1, storage at room temperature in a dry, cool place.
To prevent contamination, use glue 2.
3, filling the gap is large or the ambient temperature is too low, can be usedto accelerate curing curing accelerator.
Four, packaging
50ml, 250ML.
This product, stable quality, strong adhesion, sealing for auto filter cover.
FS-1319 anaerobic adhesive
"The myth of" FS1319 anaerobic adhesive factory is the production of theselected raw materials for high performance acrylic adhesive metalmaterials. The adhe. The adhesive component, low viscosity, high strength,fast curing; steel, iron, copper, aluminum and other adhesive bonding effect is good, especially suitable for rare earth permanent magnet materials and metal substrate.
One, main performance and index
| 1、appearance： | purple liquid |
| 2、viscosity（23℃）： | 800～1200 |
| 3、curing time（23℃）： | initial curing:5mins，full curing:24hrs |
| 4、max filling gaps： | 0.2mm |
| 5、testroy torque： | ≥15N·m |
| 6、shear strength： | ≥12MPa |
| 7、shelf life： | 1year (25℃below) |
Two, the use of methods
1, to be bonded parts with acetone scrub, completely remove the oil andrust stains.
2, after solvent volatilization, uniform coating, coating weight should ensure that coated with adhesive surface, no leakage.
3, after the glue, standing for a few minutes, the preliminary position can be moved.
In three, the matters needing attention
1, storage at room temperature in a dry, cool place.
To prevent contamination, use glue 2.
3, filling the gap is large or the ambient temperature is too low, can be usedto accelerate curing curing accelerator.
Four, packaging
50ml, 250ML.
This product, stable quality, strong adhesion, suitable for speaker magnetor PCB plane adhesion.