Tel：+86 710 311 8989
Fax：+86 710 346 7330
Email：sales@feng-shen.com
Address：The 2nd JiaWa Industrial Park, No.19 RenMin Rd,XiangYang City,HuBei Province,441000 China.
Anaerobic Sealant Accelerator
Position：Home > Products > Industrial Glue > Anaerobic Sealant Accelerator >200 series of thread locking sealant
100% fill thread clearance hypoxia form dry film, locking nuts, bolts and screws to avoid vibration caused by loose, can play a very good sealing, rust and corrosion effect. Only a small amount of 200 series of thread locker, can maximum limit to ensure product quality and reliability. One component, fast curing, the use of a wide range of temperatures, condensate water, oil resistance, shock resistance, corrosion resistance; on the surface has a slight pollution situation, there are still solid, seal or lock good bonding effect; various strength, viscosity and harsh environmental conditions using the thread locking agent, provides the best select the solution to your problem in the production, repair.
1222螺纹锁固密封剂
The 1222 thread locker
包装规格：10ml/瓶、50ml/瓶、250ml/瓶
Packaging specifications: 10ml/ bottle, 50ml/ bottle, 250ml/ bottle
低强度，触变性粘度，用于经常拆卸的螺纹锁固与密封，如M2~M12十字头、一字头及小规格螺钉、管头的锁固与密封。
Low intensity, thixotropic viscosity, frequent disassembly for thread locking and sealing, such as M2~M12 cross head, a head and small size screw, the head tube locking and sealing.
1242螺纹锁固密封剂
The 1242 thread locker
包装规格：10ml/瓶、50ml/瓶、250ml/瓶
Packaging specifications: 10ml/ bottle, 50ml/ bottle, 250ml/ bottle
通用型，中强度，触变性粘度，用于M6-M36螺纹锁固与密封及加强键销的固持。如螺钉、螺母的锁固
In general, the strength, thixotropic viscosity, for the M6-M36 thread locking and sealing and strengthen holding key pin. Such as screw, nut locking
1243螺纹锁固密封剂
The 1243 thread locker
包装规格：10ml/瓶、50ml/瓶、250ml/瓶
Packaging specifications: 10ml/ bottle, 50ml/ bottle, 250ml/ bottle
中强度，容油性好，可在轻微油质表面使用。可用于惰性表面，快速固化，用于M20以下螺纹的锁固与密封。如需经常拆卸的油箱底壳螺丝等。
Medium strength, good oil content, slightly oily in the surface. Can be used for inert surface, fast curing, used for locking and sealing of M20 following thread. For the regular removal of the tank bottom shell screw etc..
1262螺纹锁固密封剂
The 1262 thread locker
包装规格：10ml/瓶、50ml/瓶、250ml/瓶
Packaging specifications: 10ml/ bottle, 50ml/ bottle, 250ml/ bottle
高强度，触变性粘度，耐化学性好，适于大多数金属表面，M20以下螺纹锁固与密封。如发动机的螺纹锁固与密封，可承受强烈振动
High strength, thixotropic viscosity, good chemical resistance, and is suitable for most of the metal surface, the M20 following thread locking and sealing. Such as engine thread locking and sealing, which can withstand the intense vibration
1271螺纹锁固密封剂
The 1271 thread locker
包装规格：10ml/瓶、50ml/瓶、250ml/瓶
Packaging specifications: 10ml/ bottle, 50ml/ bottle, 250ml/ bottle
超高强度，中粘度，用于M36以下螺纹锁固与密封。
Ultra high strength, medium viscosity, for the M36 following thread locking and sealing.
1272螺纹锁固密封剂
The 1272 thread locker
包装规格：10ml/瓶、50ml/瓶、250ml/瓶
Packaging specifications: 10ml/ bottle, 50ml/ bottle, 250ml/ bottle
高强度、高粘度、耐高温，用于高温工况下的螺栓锁固与密封。
High strength, high viscosity, high temperature resistance, high temperature condition for the bolt locking and sealing.
1277螺纹锁固密封剂
The 1277 thread locker
包装规格：10ml/瓶、50ml/瓶、250ml/瓶
Packaging specifications: 10ml/ bottle, 50ml/ bottle, 250ml/ bottle
高强度、高粘度、耐化学、适于活性金属表面，用于M56以下较大规格螺纹锁固、密封，法兰密封，可取代垫片。
High strength, high viscosity, chemical resistance, suitable for active metal surface, for the M56 following large size, thread locking and sealing, sealing flange, can replace the gasket.
1290螺纹锁固密封剂
The 1290 thread locker
包装规格：10ml/瓶、50ml/瓶、250ml/瓶
Packaging specifications: 10ml/ bottle, 50ml/ bottle, 250ml/ bottle
中强度、低粘度、高渗透性，用于已装配好M2～M12螺纹锁固与密封，焊缝、铸件砂眼（小于φ0.1）等微孔密封。
Medium strength, low viscosity, high permeability, for assembled M2 ~ M12 thread locking and sealing, welding, casting sand holes (less than 0.1), the pore sealing.
碗形塞密封剂
Bowl plug sealant
包装规格：10ml/瓶、50ml/瓶、250ml/瓶
Packaging specifications: 10ml/ bottle, 50ml/ bottle, 250ml/ bottle
高强度，触变性粘度，立面涂不流淌，耐油、耐热性好，用于发动机碗形塞的密封固持、轴承安装、气缸筒套固持；避免精密部件变形。
High strength, thixotropic viscosity, surface coating is not flowing, oil resistance, good heat resistance, used for engine bowl plug seal holding, bearing, cylinder fixing; avoid precision parts deformation.
主要物理机械性能
Main physical and mechanical properties
| product performance |
1222 purple |
1242 blue |
1243 blue |
1262 red |
1271 red |
1272 red |
1277 red |
1290 green |
bowl type sealants |
| max filling gap(mm) | 0.13 | 0.13 | 0.13 | 0.13 | 0.13 | 0．25 | 0．25 | 0．10 | 0.13 |
| viscosity（mPa.s） | 1200 | 1200 | 2300 | 1900 | 500 | 9500 | 7000 | 37 | 500 |
| faience ware(N.m) | 6 | 12 | 20 | 21 | 25 | 28 | 38 | 30 | 25 |
| the average removal torque(N.m) | 4 | 4.8 | 7 | 25 | 31 | 25 | 32 | 29 | 31 |
| working temperature(℃) | -54～+149 | -54～+149 | -55 | -54～+149 | -54～+149 | -54～+230 | -54～+149 | -54～+149 | -55～+149 |
|
25℃ curing time （initial/final） |
20mins/24hrs | 20mins/24hrs | 20mins/24hrs | 10mins/24hrs | 20mins/24hrs | 20mins/24hrs | 60mins/24hrs | 3mins/24mins | 10mins/24hrs |
Note: the failure moment and the average removal torque is no clamping force on the M10-2 bolt nut glue curing measured after 24 hours.
使用要点
Use points
l 一般用途的螺纹用布擦干净，重要螺纹要用丙酮清洗，然后涂固持胶。
L general purpose thread cloth clean, an important thread to cleaning with acetone, then coated with fixing glue.
l 触变性胶液在使用前要摇匀。
L thixotropy glue to shake before use.
l 对于盲孔，需先在孔内涂上锁固胶；
L for blind holes, first in the hole with locking solid glue;
l 长啮合的螺栓，需在内外螺纹上都涂胶。
Bolt l long engagement, needs the glue on the inner and outer thread.
l 对用中低强度厌氧胶锁固的螺栓，使用一般手动工具即可拆卸。用高强度厌氧胶锁固的螺栓，使用大扭矩或加热高温（250℃）拆卸。
L on the bolts with low intensity of anaerobic adhesive lock, the use of general hand tools can be removed. The locking bolt with high intensity anaerobic adhesive, high torque or heating high temperature (250 ℃) removal.
l 未用完的胶液不可混入原胶液中，金属及油污不可混入瓶内。
Glue l unused can not be mixed with the original glue, metal and oil can not be mixed with the bottle.
l 适用于工件材料为铁、铜等金属材料，但对表面活性差的氧化层、惰性金属或非金属材料，固化速度较慢，可配合使用促进剂。涂促进剂后晾干即可涂胶装配。
L is suitable for the workpiece material for iron, copper and other metal materials, but the poor surface activity of the oxide layer, inert metal or non-metallic materials, curing speed, with the use of accelerator. After the dry glue coated accelerator assembly.
l 存放于阴凉避光处，贮存期为一年，超过一年后胶液无异常，仍可使用
L store in a cool, dark place, storage period of one year, more than a year after the glue without exception, can use