Tel：+86 710 311 8989
Fax：+86 710 346 7330
Email：sales@feng-shen.com
Address：The 2nd JiaWa Industrial Park, No.19 RenMin Rd,XiangYang City,HuBei Province,441000 China.
Anaerobic Flange Sealant
Position：Home > Products > Industrial Glue > Anaerobic Flange Sealant >Anaerobic flange sealant
Anaerobic one component adhesive. When exposed to air to keep to a fluid state, when the assembly parts, glue into the concave point gap and the scratch, the realization of the 100% between the metal to metal contact, cut off from the air and on the metal ions can be fast curing, and play the role of sealing elastic or rigid durable adhesive layer. To improve the reliability of the sealing, increasing the overall rigidity and bearing capacity. To meet the field of forming, curing. Extrusion parts due to exposure is not cured in air, can be removed. The formation of seal pressure, temperature resistance, no corrosion. Easy to use, with excellent sealing applicability. Replace the gasket, sealing of small gap plane, widely used in automobile, motorcycle and sealing all kinds of machinery, equipment, etc., the flange end cover joint surface.
1510平面密封胶
1510 plane sealant
包装规格：300ml/支
Packaging specifications: 300ml/
耐高温达204℃、胶层刚性好、触变性粘度、耐溶剂、无腐蚀性,耐介质性能好，用于刚性结构、紧密配合的、平面静密封或做垫片涂层。如发动机齿轮箱分开面、曲轴箱分开面、盖板等平面密封。
High temperature of 204 ℃, layer rigidity, thixotropic viscosity, solvent resistance, no corrosion, medium resistance performance is good, for rigid structure, close fitting, plane static seal or gasket coating. If the engine gearbox apart, crankcase splitting plane, plane seal cover.
1515平面密封胶
1515 plane sealant
包装规格：300ml/支
Packaging specifications: 300ml/
通用型、柔韧性胶层、触变性粘度，耐溶剂、无腐蚀性, 用于密封面有伸缩或振动结合面的静密封。如密封泵类、变速箱体、机体端盖、法兰、车桥等零件的结合面。
Universal, flexible layer, thixotropic viscosity, solvent resistance, no corrosion, sealing surface for the expansion or vibration of the static seal. With such as sealed pump, gearbox, the end cover, flange, axle and other parts of the face.
1518平面密封胶
1518 plane sealant
包装规格：300ml/支
Packaging specifications: 300ml/
通用型、柔韧性胶层、耐流体性能优良，无腐蚀性，耐溶剂性能好。特别适用于铝及铝合金表面。如汽车、摩托车发动机平面等。
Universal, flexibility, excellent adhesive fluid resistance, no corrosion, solvent resistant performance is good. Especially suitable for aluminum and aluminum alloy surface. Such as automobile, motorcycle engine plane etc..
主要物理机械性能
Main physical and mechanical properties
| item code | appearance | max filling gaps(mm) | max oil pressure（MPa） |
working temperature （℃） |
25℃ curing (initial/full) （hr） |
| 1510 | red paste | 0.25 | 36 | -54～+204 | 1～2/24 |
| 1515 | purple paste | 0.25 | 34 | -54～+150 | 1～2/24 |
| 1518 | red paste | 0.25 | 36 | -54～+150 | 1～2/24 |
Use points：
l 密封面用丙酮去除油污和其它杂质，擦干即可。
L sealing surface to remove oil and other impurities with acetone, dry.
l 在密封面上将密封剂涂成一个连续圆圈。
L in the sealing surface, sealants painted a continuous circle.
l 对准合拢，适当拧紧螺栓，避免错位，20分钟后再装配。
L alignment closure, tighten bolts, avoid dislocation, 20 minutes after the re assembly.
l 静止30～60分钟后定位，24小时固化完全。
L still 30 to 60 minutes after the positioning, 24 hours to fully cure.