Cylindrical Fixing Agentagent

   

Single component, solvent free, room temperature curing. Many varieties,can fully meet the clearance fit, transition fit and interference fit. High strength, impact resistance, medium resistance, shock resistance, aging resistance, high life. 100% filled with the gap, uniform stress, can eliminatesuch as keys and keyways, gap between the shaft and the shaft sleeve in the activities, to avoid the microseismic wear, occlusion, twisted, simplify andreduce the assembly process, improve production efficiency.To relax the tolerances, can choose the surface of low precision. Help findcalibration points in the bearing and the shaft sleeve, the production of rigid assembly more precision. To prevent corrosion of metals between frettingand metal fittings.Widely used in: the bearing is arranged in a bearing seat or shaft; the rotor,gear, sprocket and a pulley mounted on the shaft; the holding cylindersleeve; install engine bowl plug; cancel the fixing screws or pins; avoidprecision tool or machine deformation; mounting jig bushes; recovery from wear the accuracy of machine tool.

1603 cylindrical fixture gum

Packaging specifications: 50ml/ bottle, 250ml/ bottle

General purpose, high strength, low viscosity, good for oil solution, slightlygreasy surface and inert surface, especially suitable for unable to reach the surface or inert metal surface radial gap < cleaning requirements of 0.1mmholding, such as bushings, bearings, bushings, small motor rotor shaftassembly.

1609 cylindrical fixture gum

Packaging specifications: 50ml/ bottle, 250ml/ bottle

General purpose, low viscosity, high strength, holding the key / shaft,bearing, small motor shaft, bushing, repair hole / shaft wear or ultra poorgap < 0.1mm parts, fixture.

1620 cylindrical fixture gum

Packaging specifications: 50g/ pipe

High temperature (204 ℃) type. No flow of high strength, high viscosity, high temperature conditions. For intermittent working at 150~204 ℃ hole -sleeve piece holding etc.. As the holding valve casing, injection moldingcore set, valve cover, cylinder liner keyway etc..

1638 cylindrical fixture gum

Packaging specifications: 50ml/ bottle, 250ml/ bottle

Ultra high strength, high viscosity, which can be held with the gap larger,hole, shaft key, used for dynamic load or cyclic load, for having the higheststrength condition.

1648 cylindrical fixture gum

Packaging specifications: 50ml/ bottle, 250ml/ bottle

High strength, low viscosity, fast curing, continuous working temperature can reach 175 ℃, filling the gap < 0.15mm. Applicable to the clearance is small, continuous high temperature, fast fixed occasions.

1660 cylindrical fixture gum

High strength, high viscosity, paste, used to fill the gap (less than 0.5mm),with the shaft sleeve, keys, bearing cylindrical mating parts. Repair of severe wear of shaft, hole keyway, bearings, bushings, etc..

1680 cylindrical fixture gum

Packaging specifications: 50ml/ bottle, 250ml/ bottle

High strength, medium viscosity, suitable for clearance or interference fit,can replace the press fit, holding casing, shaft, gear, belt rotor, repair hole /shaft and the ultra poor gap < 0.25mm parts, fixture.

Main physical and mechanical properties