Anaerobic Thread Locking Seali

200 series of thread locking sealant

100%填满螺纹间隙缺氧形成干燥胶膜，锁固螺母、螺栓和螺钉以避免因振动而引起松动，可起很好的

100% fill thread clearance hypoxia form dry film, locking nuts, bolts and screws to avoid vibration caused by loose, can play a very good

密封、防锈和防腐蚀作用。只需少量200系列螺纹锁固密封剂，就可最大限度保证产品的质量和可靠性。

Seal, rust and corrosion protection. Only a small amount of 200 series of thread locker, can maximum limit to ensure product quality and reliability.

单组份，固化快，使用温度范围广，固化物耐水、耐油、耐震动，耐腐蚀；在表面有轻微污情况下，仍有

One component, fast curing, the use of a wide range of temperatures, condensate water, oil resistance, shock resistance, corrosion resistance; on the surface has a slight pollution situation, there are still

较好的锁固、密封或粘接效果；各种强度、各种粘度特性和严酷环境条件下使用的螺纹锁固剂，为解决您

Solid, seal or lock good bonding effect; various strength, viscosity and harsh environmental conditions using the thread locking agent, to solve your

生产、维修中的问题提供了最好选择方案。

To provide the best option, repair problems in production.

The 242 thread locker

包装规格：10ml/瓶、50ml/瓶

Packaging specifications: 10ml/ bottle, 50ml/ bottle

通用型，中强度，触变性粘度，用于M6-M36螺纹锁固与密封及加强键销的固持。如螺钉、螺母的锁固

In general, the strength, thixotropic viscosity, for the M6-M36 thread locking and sealing and strengthen holding key pin. Such as screw, nut locking

262螺纹锁固密封剂

The 262 thread locker

包装规格：10ml/瓶、50ml/瓶

Packaging specifications: 10ml/ bottle, 50ml/ bottle

高强度，触变性粘度，耐化学性好，适于大多数金属表面，M20以下螺纹锁固与密封。如发动机的螺纹锁

High strength, thixotropic viscosity, good chemical resistance, and is suitable for most of the metal surface, the M20 following thread locking and sealing. Such as engine thread lock

固与密封，可承受强烈振动

Fixing and sealing, can withstand the strong vibration

271螺纹锁固密封剂

The 271 thread locker

包装规格：10ml/瓶、50ml/瓶

Packaging specifications: 10ml/ bottle, 50ml/ bottle

超高强度，中粘度，用于M36以下螺纹锁固与密封。

Ultra high strength, medium viscosity, for the M36 following thread locking and sealing.

主要物理机械性能

Main physical and mechanical properties

Note: the failure moment and the average removal torque is no clamping force on the M10-2 bolt nut glue curing measured after 24 hours.

使用要点

Use points

一般用途的螺纹用布擦干净，重要螺纹要用丙酮清洗，然后涂固持胶。

General purpose screw threads cloth clean, important to cleaning with acetone, then coated with fixing glue.

触变性胶液在使用前要摇匀。

Thixotropic adhesive to shake before use.

对于盲孔，需先在孔内涂上锁固胶；

For the blind, need to be in the hole with locking solid glue;

长啮合的螺栓，需在内外螺纹上都涂胶。

Bolt long engagement, needs the glue on the inner and outer thread.

对用中低强度厌氧胶锁固的螺栓，使用一般手动工具即可拆卸。用高强度厌氧胶锁固的螺栓，使用大扭矩或加热高温（250℃）拆卸。

The bolts with low intensity of anaerobic adhesive lock, the use of general hand tools can be removed. The locking bolt with high intensity anaerobic adhesive, high torque or heating high temperature (250 ℃) removal.

未用完的胶液不可混入原胶液中，金属及油污不可混入瓶内。

Glue the unused can not be mixed with the original glue, metal and oil can not be mixed with the bottle.

适用于工件材料为铁、铜等金属材料，但对表面活性差的氧化层、惰性金属或非金属材料，固化速度较慢，可配合使用促进剂。涂促进剂后晾干即可涂胶装配。

Applied to the workpiece material: iron, copper and other metal materials, but the poor surface activity of the oxide layer, inert metal or non-metallic materials, curing speed, with the use of accelerator. After the dry glue coated accelerator assembly.

存放于阴凉避光处，贮存期为一年，超过一年后胶液无异常，仍可使用。

Store in a cool, dark place, storage period of one year, more than a year after the glue without exception, can use.