Tel：+86 710 311 8989
Fax：+86 710 346 7330
Email：sales@feng-shen.com
Address：The 2nd JiaWa Industrial Park, No.19 RenMin Rd,XiangYang City,HuBei Province,441000 China.
Casting Adhesive
Position：Home > Products > Auto Glue > Casting Adhesive >Casting adhesive
A, product description
铸工胶主要用于铁质、钢质铸件砂眼、气孔或裂纹等铸造缺陷的填补，也可作一般结构胶使用。
Casting adhesive is mainly used to fill the iron, steel casting sand casting defects, pores or cracks, also can be used as a general structural adhesive.
二、产品特性
Two, the characteristics of the product
◆. 双组份常温固化型胶粘剂，使用方便;
◆. Two component room temperature curable adhesive, easy to use;
◆. 强度高，具有较强的耐磨性;
◆. High strength, high wearing resistance;
◆. 具有较好的耐热、耐蚀性和较小的收缩性;
◆. Shrinkage has good heat resistance, corrosion resistance and small;
三、产品技术参数
Three technical parameters, product
固化前技术参数
Technical parameters before curing
| testing items | testing condition | ZG-A | ZG-B |
| appearance | sight test | silver grey paste | milky white paste |
| density:g/cm3 | 25℃ | 1.4～1.5 | 1.0～1.2 |
| shelf life | 25℃ | 24 months | 24 months |
Technical parameters after curing
| test items | standard | result |
| hardness: Shore-D | ASTM-D-2556 | 80 |
| shear strength | GB7124-86 | 185 kg/cm2 |
| compressive strength | GB1041-79 | 880 kg/cm2 |
| tensile strength | GB6329-86 | 325 kg/cm2 |
| bending strength | GB1042-79 |
486 kg/cm2 |
四、使用方法
Four, the use of methods：
1． 首先将找出待修处清洗干净，无污渍。
1 will be the first to find out to be repaired at the clean, no stains.
2． 用锉刀，砂纸等工具将表面处理平整。
2 with the file, sandpaper tool surface treatment.
3． 按A,B组分体积比1：1比例充分调均匀，涂敷于待修物件上。
3 press A, B component volume 1:1 proportion is fully adjustable uniform, coating on the maintenance object.
4． 粘接完成24小时后可进行各种加工处理。
The 4 bonding after 24 hours of various processing.
五、储存及有效期
Five, storage and shelf life
属于非危险品，请储存于温度在27℃以下的阴凉干燥处，有效期为24个月。
Belong to non dangerous goods, please store in temperature at 27 ℃ in a cool and dry place, valid for a period of 24 months.
六、注意事项
In six, the matters needing attention
◆ 该胶混合后有1小时左右的使用期。
◆ the glue mixed after 1 hours of use period.
◆ 再次使用前应按照配比将A,B组分混合均匀，做到混合物无色差即可使用。
◆ again before use should be according to the ratio of A, B components are evenly mixed, the mixture can be used to do without color.
◆ 完全固化后无毒性,但固化前应避免与眼睛、小孩接触;工作环境区域注意保持通风.
◆ after complete curing of non-toxic, but should avoid contact with eyes, the child before curing; work environment to keep ventilation