Slow Drying AB Adhesive

                                                           
 

One, main uses:

General, the curing time is abundant, can be adjusted within an hour,intensity is basically unchanged. Can be used for metal in electrical and electronic products (except copper), the bonding between the hard plastic,ferrite, ceramics, glass and other materials.

Two, the main features

The curing time is slow, 45 minutes, 2 hours after the use of strength can reach.

The operation is good, suitable for assembly line operation.

The two components, without the need of precise measurement, surfacewithout strict treatment.

④ can bonding material widely, weatherability.

Three, the main performance index

Appearance: A red viscous liquid, no mechanical impurities; B green viscous liquid, no mechanical impurity

Viscosity: (CPS, 25 ℃) A:6000 ± 500 B:6000 ± 500

The curing time (25 ℃ min.): ≤ 45

The tensile shear strength (steel sheet, steel sheet.MPa x): = 17

Impact strength (kJ/m2): 8

Four, the use of methods

The A adhesive and B adhesive according to visual is simpler than 1:1 after mixing, the glue coating on the bonding material, lamination press.

The two bonded materials were treated with A glue and B glue, paste withrubbing back and forth several pressing.

Caution: This product contains flammable solvents, use and storage away from fire, work to maintain good ventilation.

Five, storage: stored in cool, dry conditions, the storage period of one year.